-->

Safe and Efficient Driving 10 Tips from Ford

Safe and Efficient Driving 10 Tips from Ford

10 tips on safe driving and efficient - Safety drive on the highway becomes very vital, especially seeing the increasing number of accidents that occur these days, more due to human error due to negligent driving. Public awareness or understanding of safety driving is still very minimal. Therefore, Ford Motor Indonesia (FMI) aggressively launched a campaign on road safety through the Ford Driving Skills for Life (DSFL) since 2008. CSR program of FMI to affirm their commitment who want memerluas knowledge and awareness about safe driving techniques and environmentally friendly.
Ford DSFL program following 10 tips on safe driving and efficient for drivers of four-wheeled vehicles, which are expected to be useful and beneficial for many people.

Always Wear Seat Belt While Driving
Before you start driving, make sure to always wear a seat belt.

Check Tire Pressure Wind accordance Prompts
Always check tire pressure once a week. Tire pressure of 2-3 psi generally differ between the front tires to the rear.

Adjust the Side and Rear Mirrors to Get a clear view
Adjust the rearview mirror before driving. Checking the rearview mirror prior to travel is required, as it will help your view to determining the distance to other vehicles.

Driving with Confidence
Anticipation Traffic Situation. Always anticipate the things that will happen while driving, try to control your emotions. Be calm will be very helpful when the traffic situation was solid. Always anticipate every situation will be very helpful to you.

Always Focus When Driving
Do not do things out of driving
Driving is a multitasking job, because you have to be able to anticipate and confront everything that happened on the highway. Therefore it takes concentration while driving and avoid things that can disrupt your concentration, such as calling, eating or drinking, dressing, and other things outside of driving.

Maintain a safe distance '3-Seconds' inter Vehicles
Maintain a distance of 3 seconds
As well as being used in developed countries, use the method interval '3-seconds. "This can be done by determining the object static as the check point, and calculate it by means of 1 and 1, 1 and 2, 1 and 3, etc. , Only by considering three seconds, then the actual distance will automatically follow, because the driver only needs to keep pace with the speed of the vehicle in front of you.

Adjust Substitution Gigi
regulate the gas and brake pedals
Try driving at low engine speeds, where the ideal gear shift range between 1500-2500 rpm. For gasoline engined vehicles, try to change gears in the range of ± 2.500 rpm, while for diesel engines in the range ± 2,000 rpm. In general, the same rpm at a different gear will produce different speeds. Fuel consumption will be more time wasted on low gear.

Use Momentum to Save Fuel
pay attention to rev the engine when driving
Momentum is needed to save fuel consumption. It had to do was release the gas pedal gradually and smooth before stopping at traffic light before it turns, and when traffic conditions are being jammed. Also, get used to maintain a constant speed of your vehicle.

When Allow, Turn off the machine When the Vehicle Stuck in Gridlock
If stuck in traffic more than 20 seconds, turn off the engine
If you are stuck in traffic conditions are very jammed and the vehicle stopped completely for more than 20-30 seconds. If you're stopped, move the shift gear position to position N and the handbrake in the ON position.

Bring Avoid Overload
If not needed, avoid carrying excessive stuff and not have to carry goods that are not needed. Excess baggage will affect the weight of the vehicle, thus making the fuel consumption becomes more and more extravagant. Excessive weight, indirectly also affect the sustainability of the vehicle. To that end, it is better to bring goods that is only associated with the vehicle purposes only.
Safe and Efficient Driving 10 Tips from Ford

reference: www.carmudi.co.id

Share this:

Disqus Comments